Interlogix GE-DSH-73 Series User Manual Uživatelský manuál stáhnout pdf (Strana 32)

Chapter 2: Installation

28 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual

forms an open circuit. The following illustration shows an application example for

wiring the fault alarm contacts.

Figure 2-16: 6-Pin Terminal Block Fault Alarm contact

NOTE: The wire gauge for the terminal block should be in the range between 12 ~ 24

AWG.

Figure 2-17: Power Fault Alarm trigger description

Wiring the Digital Inputs / Outputs (GE-DSH-73)

There is another terminal block comprising two sets of digital input/output contacts

on the topside of GE-DSH-73. Please refer to the Digital Input/Output section for how

to configure Digital Input/Output. The following illustration shows the pin assignment

of the DIDO connector. Please note do not connect DO0/DO1 to the external device

using power higher than 40V/200mA.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 178 179

Žádné komentáře

Interlogix GE-DSH-73 Series User Manual Uživatelský manuál Strana 32