Interlogix NS3702-24P-4S Command Line Guide Uživatelský manuál Strana 62
- Strana / 405
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
-62-
Example:
To set the Re-authenticated Period (777 seconds).
Switch# configure terminal
Switch (config)# dot1x authentication timer re-authenticate 777
4.2.29 dot1x feature
Command:
dot1x feature guest-vlan | radius-qos | radius-vlan
Default:
Disable
Usage Guide:
To enable the guest-vlan, radius-qos, radius-vlan for Network Access Server
Example:
To enable the guest-vlan, radius-qos, radius-vlan for Network Access Server.
Switch# configure terminal
Switch (config)# dot1x authentication timer re-authenticate 777
4.2.30 dot1x guest-vlan
Command:
dot1x guest-vlan <1-4095>
<1-4095> Guest VLAN ID used when entering the Guest VLAN.
Default:
1
Usage Guide:
To set the value of guest-vlan for Network Access Server
Example:
To set the value of guest-vlan(2) for Network Access Server
Switch# configure terminal
- NS3702-24P-4S 1
- Command Line Guide 1
- Contents 3
- 1.1 Accessing the CLI 19
- 1.2 Command Line Modes 19
- 1.3 Requirements 20
- 2.1 Terminal Setup 21
- 2.2 Logon to the Console 23
- 2.3 Configuring IP Address 23
- Configuring IP Address 24
- 3.1 Telnet Login 26
- 4.1 clear 27
- 4.1.4 clear ip arp 28
- 4.1.23 clear ipv6 neighbors 36
- 4.1.28 clear lacp statistics 38
- 4.1.29 clear lldp statistics 38
- 4.1.37 clear mvr name 42
- 4.1.38 clear mvr statistics 42
- 4.1.39 clear mvr vlan 42
- GigabitEthernet 44
- 4.1.46 clear statistics * 45
- 4.2 configure terminal 46
- 4.2.13 access management 51
- 4.2.14 access-list ace 52
- 4.2.18 aggregation mode 55
- 4.2.19 aggregation mode 56
- 4.2.20 banner 57
- 4.2.21 banner exec 57
- 4.2.22 banner login 58
- 4.2.23 banner motd 59
- 4.2.24 clock summer-time 60
- 4.2.25 clock timezone 60
- 4.2.29 dot1x feature 62
- 4.2.30 dot1x guest-vlan 62
- 4.2.32 dot1x max-reauth-req 63
- 4.2.36 enable password 65
- 4.2.37 enable password level 65
- 4.2.38 enable secret 66
- 4.2.39 end 67
- 4.2.40 exit 67
- 4.2.43 gvrp 69
- 4.2.44 gvrp max-vlans 69
- 4.2.45 gvrp time 70
- 4.2.46 help 71
- 4.2.47 hostname 71
- 4.2.48.3 access-list logging 73
- 4.2.48.4 access-list policy 74
- 4.2.48.9 aggregation group 76
- 4.2.48.10 description 77
- 4.2.48.11 do 77
- 4.2.48.12 dot1x guest-vlan 78
- 4.2.48.13 dot1x port-control 78
- 4.2.48.14 dot1x radius-qos 79
- 4.2.48.15 dot1x radius-vlan 79
- 4.2.48.17 duplex 80
- 4.2.48.18 end 81
- 4.2.48.19 excessive-restart 82
- 4.2.48.20 exit 82
- 4.2.48.21 flowcontrol 83
- 4.2.48.34 ip verify source 89
- 4.2.48.40 lacp 92
- 4.2.48.41 lacp key 93
- 4.2.48.42 lacp port-priority 93
- 4.2.48.43 lacp role 94
- 4.2.48.44 lacp timeout 94
- 4.2.48.45 lldp cdp-aware 95
- 4.2.48.48 lldp receive 97
- 4.2.48.54 lldp transmit 100
- 4.2.48.55 loop-protect 100
- 4.2.48.60 media-type 103
- 4.2.48.61 mtu 103
- 4.2.48.63 mvr name 104
- 4.2.48.64 mvr vlan 105
- 4.2.48.67 ping ip 106
- 4.2.48.66 no 106
- 4.2.48.68 poe mode 107
- 4.2.48.69 poe pdcheck IP 108
- 4.2.48.70 poe pdcheck action 108
- 4.2.48.71 poe pdcheck enable 109
- 4.2.48.75 poe power limit 111
- 4.2.48.76 poe priority 111
- 4.2.48.77 poe time-range 112
- 4.2.48.78 port-security 113
- 4.2.48.82 pvlan 115
- 4.2.48.83 pvlan isolation 115
- 4.2.48.84 qos cos 116
- 4.2.48.85 qos dei 116
- 4.2.48.86 qos dpl 117
- 4.2.48.87 qos dscp-classify 117
- 4.2.48.88 qos dscp-remark 118
- 4.2.48.89 qos dscp-translate 118
- 4.2.48.90 qos map cos-tag 119
- 4.2.48.91 qos map tag-cos 120
- 4.2.48.92 qos pcp 121
- 4.2.48.93 qos policer 121
- 4.2.48.96 qos shaper 123
- 4.2.48.98 qos storm unicast 124
- 4.2.48.99 qos storm unknown 125
- 4.2.48.100 qos tag-remark 125
- 4.2.48.102 qos trust dscp 126
- 4.2.48.103 qos trust tag 127
- 4.2.48.106 shutdown 129
- 4.2.48.107 spanning-tree 129
- 4.2.48.116 speed 134
- 4.2.48.126 switchport mode 140
- 4.2.49 interface vlan 146
- 4.2.49.1 do 147
- 4.2.49.2 end 147
- 4.2.49.3 exit 148
- 4.2.49.4 ip address 148
- 4.2.49.5 ip address dhcp 149
- 4.2.49.7 ip dhcp server 150
- 4.2.49.8 ip igmp snooping 151
- 4.2.49.18 ipv6 address 157
- 4.2.49.19 ipv6 mld snooping 157
- 4.2.49.28 no 163
- 4.2.50 ip arp inspection 163
- 4.2.56 ip dhcp pool 167
- 4.2.56.1 broadcast 168
- 4.2.56.4 client-name 170
- 4.2.56.5 default-router 170
- 4.2.56.6 dns-server 171
- 4.2.56.7 do 171
- 4.2.56.8 domain-name 172
- 4.2.56.9 end 172
- 4.2.56.10 exit 173
- 4.2.56.11 hardware-address 174
- 4.2.56.12 host 174
- 4.2.56.13 lease 175
- 4.2.56.15 netbios-node-type 176
- 4.2.56.16 netbios-scope 176
- 4.2.56.17 network 177
- 4.2.56.18 nis-domain-name 178
- 4.2.56.19 nis-server 178
- 4.2.56.20 no 179
- 4.2.56.21 ntp-server 179
- 4.2.56.22 vendor 180
- 4.2.57 ip dns proxy 180
- 4.2.58 ip helper-address 181
- 4.2.60 ip http secure-server 182
- 4.2.61 ip igmp host-proxy 183
- 4.2.63 ip igmp snooping 184
- 4.2.64 ip igmp snooping vlan 184
- 4.2.65 ip igmp ssm-range 185
- 4.2.67 ip name-server 186
- 4.2.68 ip name-server dhcp 186
- 4.2.70 ip route 188
- 4.2.71 ip routing 188
- 4.2.73 ip ssh 190
- 4.2.74 ip verify source 190
- 4.2.76 ipmc profile 191
- 4.2.77.1 default range 192
- 4.2.77.2 description 193
- 4.2.77.3 do 193
- 4.2.77.4 end 194
- 4.2.77.5 exit 195
- 4.2.77.6 no 195
- 4.2.77.7 range 196
- 4.2.78 ipv6 mld host-proxy 196
- 4.2.80 ipv6 mld snooping 197
- 4.2.82 ipv6 mld ssm-range 198
- 4.2.84 ipv6 route 200
- 4.2.85 lacp system-priority 201
- 4.2.86 line 201
- 4.2.86.1 do 202
- 4.2.86.2 editing 202
- 4.2.86.3 end 203
- 4.2.86.4 exec-banner 203
- 4.2.86.5 exec-timeout 204
- 4.2.86.6 exec-timeout 205
- 4.2.86.7 exit 205
- 4.2.86.8 history size 206
- 4.2.86.9 length 206
- 4.2.86.10 location 207
- 4.2.86.11 motd-banner 207
- 4.2.86.12 no 208
- 4.2.86.13 privilege level 208
- 4.2.86.14 width 209
- 4.2.87 lldp holdtime 210
- 4.2.88 lldp med datum 210
- 4.2.89 lldp med fast 211
- 4.2.95 lldp reinit 215
- 4.2.96 lldp timer 215
- 4.2.98 logging host 217
- 4.2.99 logging level 217
- 4.2.100 logging on 218
- 4.2.101 loop-protect 218
- 4.2.106 monitor destination 221
- 4.2.107 monitor source 222
- 4.2.108 mvr 222
- 4.2.128 network-clock option 234
- 4.2.133 no 238
- 4.2.134 ntp 238
- 4.2.135 ntp server 239
- 4.2.137 poe management mode 240
- 4.2.140 poe sequential rule 242
- 4.2.141 poe supply 242
- 4.2.144 poe usage-threshold 244
- 4.2.145 poe-time-range 245
- 4.2.145.1 do 245
- 4.2.145.2 end 246
- 4.2.145.3 exit 246
- 4.2.145.4 no 247
- 4.2.145.5 periodic 247
- 4.2.145.6 reboot-only 248
- 4.2.146 port-security 249
- 4.2.147 port-security aging 250
- 4.2.149 privilege 251
- 4.2.150 qos map cos-dscp 252
- 4.2.152 qos map dscp-cos 254
- 4.2.155 qos qce 258
- 4.2.156 qos qce update 259
- 4.2.157 qos qce refresh 260
- 4.2.158 qos wred 261
- 4.2.163 radius-server host 264
- 4.2.164 radius-server key 265
- 4.2.167 rmon alarm 267
- 4.2.168 rmon event 268
- 4.2.170 snmp-server 269
- 4.2.171 snmp-server access 270
- 4.2.175 snmp-server host 273
- 4.2.175.1 do 273
- 4.2.175.2 end 274
- 4.2.175.3 exit 275
- 4.2.175.4 host 275
- 4.2.175.5 no 276
- 4.2.175.6 informs 276
- 4.2.175.7 shutdown 277
- 4.2.175.8 traps 278
- 4.2.175.9 version 278
- 4.2.176.1 do 280
- 4.2.176.2 end 280
- 4.2.176.3 exit 281
- 4.2.176.4 no 282
- 4.2.184 upnp 291
- 4.2.186 upnp ttl 292
- 4.2.187 username 293
- 4.2.188 vlan 294
- 4.2.188.1 do 294
- 4.2.188.2 end 295
- 4.2.188.3 exit 295
- 4.2.188.4 name 296
- 4.2.188.5 no 297
- 4.2.190 vlan protocol 298
- 4.2.191 voice vlan 299
- 4.2.193 voice vlan class 300
- 4.2.194 voice vlan oui 300
- 4.2.195 voice vlan vid 301
- 4.2.196 web privilege group 302
- 4.3 copy 302
- 4.3.1 copy 302
- 4.4 debug 303
- 4.4.1 debug 303
- 4.5 delete 304
- 4.5.1 delete 304
- 4.6 dir 305
- 4.6.1 dir 305
- 4.7 disable 305
- 4.7.1 disable 305
- 4.8.1 do 306
- 4.9 dot1x 307
- 4.9.1 dot1x initialize 307
- 4.10 enable 307
- 4.10.1 enable 307
- 4.11 exit 308
- 4.11.1 exit 308
- 4.12 firmware 308
- 4.12.1 firmware swap 308
- 4.12.2 firmware upgrade 309
- 4.13 ip 310
- 4.14 logout 310
- 4.14.1 logout 310
- 4.15 more 311
- 4.15.1 more 311
- 4.16 no 312
- 4.16.1 no 312
- 4.17 ping 312
- 4.17.1 ping ip 312
- 4.17.2 ping ipv6 313
- 4.18 reload 314
- 4.18.1 reload cold 314
- 4.18.2 reload defaults 315
- 4.19 send 315
- 4.19.1 send 315
- 4.20 show 316
- 4.20.1 show aaa 316
- 4.20.3 show access-list 317
- 4.20.4 show access-list 319
- 4.20.6 show aggregation 321
- 4.20.7 show aggregation mode 322
- 4.20.8 show clock 323
- 4.20.9 show clock detail 323
- 4.20.11 show dot1x status 326
- 4.20.12 show green-ethernet 327
- 4.20.15 show history 328
- 4.20.22 show interface vlan 333
- 4.20.23 show ip arp 334
- 4.20.26 show ip dhcp pool 337
- 4.20.27 show ip dhcp relay 338
- 4.20.28 show ip dhcp server 338
- 4.20.39 show ip route 346
- 4.20.41 show ip ssh 348
- 4.20.42 show ip statistics 348
- 4.20.44 show ipmc profile 351
- 4.20.45 show ipmc range 351
- 4.20.46 show ipv6 interface 352
- 4.20.49 show ipv6 neighbor 355
- 4.20.50 show ipv6 route 355
- 4.20.52 show lacp 358
- 4.20.53 show line 358
- 4.20.58 show logging 362
- 4.20.59 show loop-protect 363
- 4.20.61 show mvr 364
- 4.20.62 show network-clock 366
- 4.20.63 show ntp status 366
- 4.20.64 show platform phy 367
- 4.20.70 show privilege 371
- 4.20.71 show pvlan 372
- 4.20.72 show pvlan isolation 372
- 4.20.73 show qos 373
- 4.20.74 show radius-server 375
- 4.20.75 show rmon alarm 376
- 4.20.76 show rmon event 377
- 4.20.77 show rmon history 377
- 4.20.78 show rmon statistics 378
- 4.20.79 show running-config 379
- 4.20.80 show snmp 381
- 4.20.81 show snmp access 383
- 4.20.83 show snmp host 385
- 4.20.87 show snmp user 390
- 4.20.88 show snmp view 391
- 4.20.89 show spanning-tree 391
- 4.20.92 show terminal 394
- 4.20.93 show upnp 395
- 4.20.94 show users 395
- 4.20.95 show version 396
- 4.20.96 show vlan 397
- 4.20.98 show vlan mac 398
- 4.20.100 show voice vlan 400
- 4.21 terminal 403
- 4.21.1 terminal editing 403
- 4.21.4 terminal length 404
- 4.21.5 terminal width 405
Související produkty a manuály pro Příslušenství komunikace Interlogix NS3702-24P-4S Command Line Guide
(13 stránky)© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.052 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce