Interlogix EV1012 Uživatelský manuál stáhnout pdf (Strana 3)

P/N 146169999-10 • REV C • ISS 02APR12 3 / 36

2B-3B 7B-8B

(3) 5 curtains

6 m range

(4) 7 curtains

6 m range

(1)

(2)

(5) 5 curtains

12 m range

(6) 7 curtains

12 m range

(7) 9 curtains

12 m range

EN: Installation Sheet

Introduction

The EV1000 series includes models EV1012 and EV1012AM.

These detectors have a patented mirror, pyro, and signal

processing technology.

Note: EV1012AM has not been evaluated by UL/cUL.

Installation guidelines

The technology used in these detectors resists false alarm

hazards. However, avoid potential causes of instability such as

(see Figure 1):

• Direct sunlight on the detector

• Strong draughts onto the detector

• Heat sources within the detector field of view

• Large animals within the detector field of view

• Obscuring the detector field of view with large objects,

such as furniture

• Objects within 50 cm (20 in.) of the anti-masking (AM)

detector

• Installing two detectors facing each other and less than

50 cm (20 in.) apart

Installing the detector

Figure 7 legend

Item Description

(1) Standard connection (factory default)

(2) Dual loop connection

CP Control panel

WT Walk test

AM Antimasking

D/N Day/night

Rtest Remote test

To install the detector:

1. Lift off the custom insert and remove the screw

(see Figure 2, item 1).

2. Using a screwdriver, carefully prise open the detector (see

Figure 2, items 2 and 3).

3. Fix the base to the wall between 1.8 m and 3.0 m (5.9 and

9.8 ft.) from the floor. For flat mounting use a minimum of

two screws (DIN 7998) in positions A. For corner-mounting

use screws in positions B or C (Figure 3). To install a pry-

off tamper, use position A or B.

Note: Using the pry-off tamper has not been evaluated by

UL/cUL.

1 2 3 4 5 6 7 8 ... 35 36

Komentáře k této Příručce

Žádné komentáře

Interlogix EV1012 Uživatelský manuál Strana 3

Komentáře k této Příručce

Související produkty a manuály pro Senzory Interlogix EV1012