Interlogix TruVision IP Camera Configuration Manual Uživatelský manuál stáhnout pdf (Strana 34)

2BChapter 3: Camera configuration

30 TruVision IP Camera Configuration Manual

To set up a NAS system:

1. In the Storage folder, click the NAS tab to open its window.

2. Enter the IP address of the network disk, and the NAS folder path.

3. Click Save to save changes.

Storage devices

Use the storage management window to display the capacity, free space

available and the working status of the HDD of the NAS and the SD card in the

camera. You can also format these storage devices.

Before formatting the storage device, stop all recording. Once formatting is

completed, reboot the camera as otherwise the device will not function properly.

If Overwrite is enabled, the oldest files are overwritten when the storage

becomes full.

To format the storage devices:

1. Click the Storage Management folder to open its window.

2. Check the HDD Number column to select the storage.

3. Click Format. A window appears to check your formatting permission.

4. Click OK to start formatting.

Recording schedule

You can define a recording schedule for the camera in the “Record Schedule”

window. The recording is saved on to the SD card or NAS in the camera. The

camera’s SD card provides a backup in case of network failure.

The selected recording schedule applies to all alarm types.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 53 54

Žádné komentáře

Interlogix TruVision IP Camera Configuration Manual Uživatelský manuál Strana 34