Interlogix TruVision IP Camera Configuration Manual Uživatelský manuál stáhnout pdf (Strana 37)

: Camera configuration

TruVision IP Camera Configuration Manual 33

To set up the RS-232 settings:

1. In the System folder, click the RS232 tab to open its window.

2. Select the RS-232 port parameters.

Note: If you want to connect the camera using the RS-232 port, the RS-232

parameters must be the same as those configured here.

3. Click Save to save changes.

RS-485 settings

The RS-485 serial port is used to control the PTZ of the camera or connect to

light and wiper devices. Configuration of these parameters should be done

before you connect to any devices.

To set up RS-485 settings:

1. In the System folder, click the RS485 tab to open its window.

2. Select the RS-485 port parameters.

Note: The Baud Rate, PTZ Protocol, and PTZ Address parameters should be

exactly the same as the PTZ camera parameters.

3. Click Save to save changes.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 53 54

Žádné komentáře

Interlogix TruVision IP Camera Configuration Manual Uživatelský manuál Strana 37