Interlogix TruVision IP Open Standards Box User Manual Uživatelský manuál stáhnout pdf (Strana 23)

2BChapter 3: Network and streaming configuring

Configuration folders Description

Serial settings Defines the RS-485 and RS-232 communication settings. See

“Serial port settings” on page 21.

Alarm parameters Defines how the camera handles alarms such as input type,

notification of alarms, and response schedules and duration.

See “Alarm parameters” on page 26.

Deployment time Defines the schedules during which events are registered.

See “Events scheduling” on page 27.

User management Defines who can use the camera, their passwords and access

privileges. See “User management” on page 37.

HDD management Defines how to format the SDHC card used in the camera.

See “Formatting the SDHC card” on page 40”.

Remote upgrade Defines how to upgrade the camera’s firmware. See

“Upgrading the firmware” on page 40.

Default Restores default settings. See “Restoring default settings” on

page 40.

Reboot device Reboots the camera. See “Rebooting the camera” on page

41.

Information about the camera

Use the “Basic configuration” menu to define the camera name and RS-485 bus

ID. The default device name is “IP Camera” and device ID is 88. The camera can

have up to 12 alphanumeric characters in its name.

Several parameters are also prepopulated and cannot be changed manually

such as the camera, encoder, panel and hardware versions.

Network parameters

Accessing the camera through a network requires that you define certain network

settings. Use the “Network Parameters” folder to define the network settings. See

Figure 9 on page 20 for further information.

Note: When a network parameter is modified, the camera will prompt you to save

and reboot.

TruVision IP Ca

m Open-Standards User Manual 19

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 63 64

Žádné komentáře

Interlogix TruVision IP Open Standards Box User Manual Uživatelský manuál Strana 23