Interlogix TruVision IP Open Standards Box User Manual Uživatelský manuál stáhnout pdf (Strana 44)

4BChapter 5: Camera management

To format the SDHC card:

1. Click the HDD Management folder to open its screen.

2. Click Select All in the HDD Number column to select the SDHC card. Only

one HDD option is listed.

3. Click Format. A screen appears showing the formatting status.

Restoring default settings

Use the Default menu to restore default settings to the camera. There are two

options available:

 Full mode: All parameters are restored to factory default settings.

 Basic mode: All parameters are restored to factory default settings except for

the network settings IP address, subnet mask gate and port.

You can also do a hard reset by pressing the INITIAL SET button on the base of

the camera (see Figure 3 on page 6).

To restore default settings:

1. Click the Default folder to open its screen.

2. Click either Full mode or Basic mode. You will receive a prompt asking you

to reboot the camera.

Upgrading the firmware

The camera firmware is stored in the flash memory. Use the upgrade function to

write the firmware file (digicap.DAV) into the flash memory.

You need to upgrade firmware when it has become outdated. When you upgrade

the firmware, all existing settings are unchanged. Only the new features are

added with their default settings.

TruVision IP Cam Open-Standards User Manual

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 63 64

Žádné komentáře

Interlogix TruVision IP Open Standards Box User Manual Uživatelský manuál Strana 44